[pjsip] Access Point problem in PjSIP Symbian S60 3ed
Srivatsan Deenadayalan
srivatsan at ongobiz.com
Mon Feb 9 09:54:57 EST 2009
Hi Pai,
Thanks for the replay.
As per my track in PjSIP when ever connection is lost, registration
failed is the message i am getting and after connecting again PjSIP
gets re-initialize, so i am getting registration success message. So, do
u think PjSIP has monitors the connection ? then after connecting it
re-initialize registration again? if yes can you specify where it happens?
Pai Peng wrote:
> Hello,
>
> to avoid popup window for asking access point, the RSocket/RConnection
> must be set to use a default AP, if you are out of Wlan or still in Wlan.
>
> Still another problem is when the RSocket can't be created/opened by
> using the defined AP, a Popup window will still be displayed for
> selecting another AP.
>
> What you can do is, check the result of RConnection::Start(), if there
> is error, than stopping RSocket usage. it will avoid the popup selection.
>
> Regards,
>
> Pai
>
>
>
>
>
> On Mon, Feb 9, 2009 at 1:54 PM, Mukesh Srivastav
> <muki_champs at yahoo.com <mailto:muki_champs at yahoo.com>> wrote:
>
> Hi,
> you try implmenting a simple http connection exmaple in
> "Symbian", you will see the same message, it is not the PJSIP IS
> smart enough, it is symbian.
>
>
> Have a look @ my small web-page:
> http://www.geocities.com/muki_champs
>
> Regards,
> Mukesh Kumar,
> Sr.Software Engineer,
> Mobile Application Developer.
> Hyderabad.
> India.
>
> <http://www.geocities.com/muki_champs>
>
>
> ------------------------------------------------------------------------
> *From:* Srivatsan Deenadayalan <srivatsan at ongobiz.com
> <mailto:srivatsan at ongobiz.com>>
> *To:* pjsip list <pjsip at lists.pjsip.org
> <mailto:pjsip at lists.pjsip.org>>
> *Sent:* Monday, February 9, 2009 6:21:58 PM
> *Subject:* Re: [pjsip] Access Point problem in PjSIP Symbian S60 3ed
>
> Hi Pai,
>
> I think some mistakes / misunderstood occur with my question. Let
> me explain again.
>
> Initially when invoking PjSIP, device will pop up for selection of
> access point, which is because of aConn.Start(). If we have given
> connection preference then we ll not get any popup's.
>
> if ((err = aSocketServer.Connect()) != KErrNone)
> return PJ_STATUS_FROM_OS(err);
>
> // Open up a connection
> if ((err = aConn.Open(aSocketServer)) != KErrNone)
> {
> aSocketServer.Close();
> return PJ_STATUS_FROM_OS(err);
> }
>
> if ((err = aConn.Start()) != KErrNone)
> {
> aSocketServer.Close();
> return PJ_STATUS_FROM_OS(err);
> }
>
> I am clear with it and my problem is not with this.
>
> At the app. launch i chooses a WLan access point from the list
> shown by device, now if i move out of range from the WLan (say 500
> meters), then WLan connection will be disconnected.Immediately a
> access point list is shown by PjSIP to make connection.
>
> My question here is... How PjSIP know / Monitors that a connection
> has been disconnected ? Is their any call back methods from
> sockets implemented to get the status ? Can any one pls give me
> the methods / area where this occurs ? Then how it re-initialize
> after connecting to a new access point ?
>
> I think this time my question might be clear.
>
>
> Pai Peng wrote:
> > hello,
> >
> >
> > it depends on Symbian C++. based for Symbian 3rd.
> >
> > Check forum nokia for auto connection with socket, there is
> already example/code for your purpose.
> >
> >
> > Regards
> >
> > Pai
> >
> > On Sat, Feb 7, 2009 at 10:27 AM, Srivatsan Deenadayalan
> <srivatsan at ongobiz.com <mailto:srivatsan at ongobiz.com>
> <mailto:srivatsan at ongobiz.com <mailto:srivatsan at ongobiz.com>>> wrote:
> >
> > Hi All,
> >
> > I have implemented PjSIP successfully in my application, and
> works
> > great. Thanks for PjSIP team :-) . I have a small problem in
> > connecting with access points (WLan / GPRS / 3G).
> > When i move out of range from a WLan access point which is used
> > by PjSIP, a pop up showing access point list is shown by the
> > device. But i don't want this access point to be shown, instead i
> > have my own methods to show and select the access points.
> >
> > I have tried to destroy PjSIP when ever any interruptions occurs
> > with connections and show my list of access points then
> > reinitialize PjSIP. Before calling my methods , device access
> > point pop up list comes in to picture.
> >
> > So my question is how to suppress the access point pop up which
> > comes when ever any connection interruption occurs ? Is
> their any
> > way to shut down and re-initialize PjSIP during disconnection of
> > internet connection?
> >
> > Please some one help me ..... :-(
> >
> > -- Thanks And Regards,
> > Srivatsan.D,
> >
> > _______________________________________________
> > Visit our blog: http://blog.pjsip.org <http://blog.pjsip.org/>
> >
> > pjsip mailing list
> > pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org>
> <mailto:pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org>>
> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >
> >
> >
> ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Visit our blog: http://blog.pjsip.org <http://blog.pjsip.org/>
> >
> > pjsip mailing list
> > pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org>
> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >
>
>
> -- Thanks And Regards,
> Srivatsan.D,
>
>
>
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org <http://blog.pjsip.org/>
>
> pjsip mailing list
> pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org>
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org>
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
--
Thanks And Regards,
Srivatsan.D,
More information about the pjsip
mailing list